Vortex submersible sewage pump wastewater treatment Building drainage system Water purification system

Product features

Efficient hydraulic structure:

With unique hydraulic component design and CFD hydraulic analysis optimization design, the submersible electric pump has higher efficiency; Impeller after dynamic balance correction, dynamic balance standard up to 6.3, so that the pump running vibration is small, stable, quiet.

Cable：

The special cable manufacturing process can completely prevent the water from entering the motor through the small gap between each phase line and line when the cable skin is damaged or the front end of the cable invades the water, resulting in the damage of the motor.

Motor：

The submersible motor is professionally designed and manufactured with protection grade IP68. The stator windings are F grade insulation. The limit working temperature of the insulation material is 155℃. The whole motor is equipped with manual reset overload protector, which has the functions of phase loss protection, overcurrent protection and overheating protection.

Impeller type:

Impeller:  vortex impeller (V)

The impeller adopts symmetrical flow channels, with good balance, stable operation, low noise, and increased product service life. The measured efficiency is higher than the national standard, saving energy and reducing consumption.

Technical data

Power Supply：Three-phase  380V 50Hz

Frequency Range：35-50Hz

Working mode: S1

Protectio grade: IP68

Insulation class：Class F

Temperature range [°C]：0-40℃

Density: ≤1.05×103kg/m3

PH value：5-9

Maximum submergence depth: 20m

Installation mode：Vertical installation