Submersible mixer submersible stirrer jet type mixer banana type mixer submersible water impeller
Design
Mixer for submersible installation.
Product application
The mixer suitable for diving installation is mainly
used for mixing, mixing and circulation in the
process of municipal engineering and industrial
sewage treatment. It can also be used for the
maintenance of landscape water environment. It can
create water flow through mixing, so as to improve
the water quality, increase the oxygen content in the
water and effectively prevent the sedimentation of
suspended solids.
Product features
High quality imported fully enclosed self-lubricating
bearing with long service life.
The special cable manufacturing process can completely
prevent the water from entering the motor through the
small gap between each phase line and line when the
cable skin is damaged or the front end of the cable
invades the water, resulting in the damage of the motor.
Two independent mechanical seals ensure long-term
reliable operation of submersible motor.
The impeller is welded by precision casting hub and
stamping blade. The blade optimized by CFD software is
swept back, with high efficiency and self-cleaning
function.
Adopt mechanical seal, no water leakage and long
service life.
The mixer is equipped with leakage sensor and stator
winding overtemperature detection device (PTC).
Technical data
Power Supply:Three-phase 380V 50Hz
Working mode: S1
Protectio grade: IP68
Insulation class:Class F (Class H is optional)
Temperature range [°C]:≤40ºC
Environment temperature:0-40ºC
Density: Less than 1.05×103 kg/m3
PH value:5-9
Installation mode:Submersible horizontal installation
Maximum submergence depth: 20m
MATERIAL:
CARBON STEEL/SUS304/SUS316
